液晶仓库

登录

高压板

数量:1000000000pcs
单价:2.00元/pcs

详细内容









 
 


  
   

   

   
PRODUCT SPECIFICATION
产品规格书

PRODUCT/产品名称:  
    CCFL BACKLIGHT INVERTER

CCFL背光电源

SAQ P/N / 型号   
    :   SQB-120 VER1.0

          
CUSTOMER / 客户 :  
           
CUSTOMER P/ N   :
客户物料编码   
               
DATE /日期         :   2009/ 05 / 21
                     
APPROVED BY/客户确认栏
NOTE / 备注

CUSTOMER
      SIGNATURE (S)

客户签章
 
RoHS
      Available
环保品
   

PREPARED BY / 编制：   
    莫坚    
          

     
    CHECKED BY / 审核：                   

     
    APPROVED BY / 批准：                  

 
                                               




 


  
   

   

   
CONTENT / 目录

Revision Record
    / 变更记录表                                                                             P.3

1.   General Description / 概述                                       P.4

2. Features / 特性                                                     P.4                                             
   

3.Application / 适用范围                                P.4

4. Suitable Load / 适用负载                                                                                  P.4                                           
   

5. Environmental Condition / 适用环境条件                                                     P.4                               
  6. Input Electrical Characteristic / 输入参数                                                      P.5
 7. Output Electrical Characteristic / 输出电气参数                                           P.5
 8. Pin Assignments / 插座引脚定义                                                                    P.5
9. Testing Circuit Diagram / 测试回路示意图                                                     P.6
10. Mechanical Dimension / 结构示意图                                                           P.7

11. Sample testing record / 样机测试记录                            P.8    
   

12. PCB Layout Diagram / 线路板印制图                             P.9

13. Safety Parts
    List / 安規器件清單                                                                    P.10

14. Abnormal Condition Testing / 非正常工作条件                                           P.10   
15. Notice / 注意事项                                                                                             P.11                                                                                                                                                                                                                                                                                        
 




  





 
 


  
   

   

   
Revision Record /变更记录表
 
No.
序号
Date
变更日期
Version
版本
Reason of revision
变更原因
Content of revision
变更内容
Prepared by
变更人
Approved by
确认人
             
             
             
             
             
             
             
             
             
             
             

The information given in this
    document is carefully checked and believed to be reliable. SAQCN reserves the right to make changes in product or specification at
    any time and without further notice.

此文件经过仔细检查和核对，内容真实，赛其创新有权根据需要，在不另行通知情况下，改进产品或规格书。
 








 
 


  
   

   

   
1. General Description / 概述
This DC-AC Inverter was developed for 1CCFL lamps Use.
本产品为直流-交流逆变器，适用于各种类型的1灯管冷阴极荧光灯应用。
 
2. Features / 特性

High performance, low consumption.
    / 具有高能低耗特点。

Open lamp protection / 灯管开路保护功能
Short lamp protection / 灯管短路保护功能
Wide Dimming Range / 宽范围调光
Lamp Current Auto Control / 灯管电流自动控制

Input current overload protected ( fuse protect
    )./ 输入过流保护（保险丝保护）

 
3. Application / 适用范围

The
    DC to AC back-light inverter is special designed on any type CCFL display in implement (i.e. LCD monitor,
    notebook、laptop computers、CCFL Lamp etc) / 本产品专为各种CCFL显示部件设计（例：LCD显示器、笔记本电脑、掌上电脑、冷阴极荧光灯等）

4. Suitable
    load / 适用负载
CCFL Module: For 1 Lamp LCD PANEL
 
5. Environmental Condition / 适用环境条件
Operating temperature /工作温度: 00C -- 500C
Storage temperature / 贮存温度 : -200C -- 600C
Operating humidity / 工作湿度 : 10% -- 80%RH
Storage humidity / 贮存湿度     : 10% -- 93%RH
 
6. Input Electrical Characteristics /输入参数
No.
Item/项目
Symbol
Min
Type
Max
Unit
1
Input Voltage/输入电压
Vin
8.0
12.0
18.5
V
2
Input Current/输入电流
Iin
<0.45
A
3
Input Power/输入功率
Pin
6.0
6.5
7.0
W
4
Brightness Voltage/调亮控制电压
Vbri
0
-----
5
V
5
On/Off Voltage/ 开关机控制电压
Enable Von=0V Disable Voff=5V
                                                                                 





 
 


  
   

   

   
7. Output electrical characteristics / 输出电气参数
Item
项目
Symbol
符号
Test Conditions
测试条件
Min
最小值
Type
规格值
Max
最大值
Unit
单位
Output Current(Max)
输出电流(最大)
Iout
Vin=12V; Von=5V; Vbrit=0V
6.0
6.5
7.0
mA
Output Current(Max)
输出电流(最大)
Iout
Vin=12V; Von=5V; Vbrit=5V
2.0
2.5
3.0
mA
Output Voltage
输出电压
Vout
Vin=12V; Von=5V; Vbrit=0V
---
650
---
Vrms
Ignition Voltage
启动电压
Vig1
Vin=12V; Von=5V; Vbrit=0V; 25℃
1300
----
-----
Vrms
Output Frequency
输出频率
f
Vin=12V; Von=5V; Vbrit=0V
----
50
----
KHz

Efficiency
      效率
η
Vin=12V; Von=5V; Vbrit=0V;
---
80
---
%
8. Pin assignments / 插座引脚定义
Input connector /输入插座: Jp1
Pin No./引脚
Symbol/符号
Description/描述
Parameter/参数
1.2
Vin
Supply voltage/供电
8.0---13.5V
3
Von/off
Standby/operation/开关机控制
On=5V Off=0V
4
Vbrit
Dimming control/亮度控制
0V=Brightness Max 亮度最大
5V=Brightness Min 亮度最小
5.6
Gnd
Ground/接地
0V
       
 
Output connector/输出插座: JP2
Pin No./引脚
Symbol/符号
Description/描述
Parameter/参数
1
H-V
High voltage/高压端
650Vrms
2
L-V
Low voltage/低压端
13Vrms
 





 
 


  
   

   

   
 
9. Testing circuit diagram / 测试回路示意图

                                                                                    
   

 






 
 


  
   

   

   



 


  
   

   

   
 




      





 
 


  
   

   

   
 
10. Mechanical Dimension / 结构示意图
Dimension of P.C.B. / PCB机械尺寸            

Unit/单位:
    mm 

Tolerance/公差: ±0.5mm

                                                    
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        
 
11. Sample Testing Record / 样机测试记录
Testing Date / 测试日期:
2009-05-21
Equipments/测试仪器:
KPS-3030D / TDS5054 / FLUKE45
Model / 型号:
SQB-120 VER1.0
Testing  Load / 测试负载:
Load Module: CCFL Lamp

Item
      / 项目

Testing
      Conditions / 测试条件
1#
JP2
---
---
---

Input
      Current

输入电流

Iin
      (A)
Vin=12V
ON/OFF=5V
Vbrit=0V
RL=100kΩ
00C
0.8
260C
0.9
500C
1.0

Output
      Voltage

输出电压

Vo
      (Vrms)
Vin=12V
ON/OFF=5V
Vbrit=0V
RL=100kΩ
00C
640
---
---
---
260C
650
---
---
---
500C
660
---
---
---

Output
      Current

输出电流

Io
      (mA)
Vin=12V
ON/OFF=5V
Vbrit=0V
RL=100kΩ
00C
6.0
---
---
---
260C
6.5
---
---
---
500C
7.0
---
---
---

Output
      Current

输出电流

Io
      (mA)
Vin=12V
ON/OFF=5V
Vbrit=5V
RL=100kΩ
00C
2.0
---
---
----
260C
2.5
---
---
---
500C
3.0
---
----
---

Output
      Frequency

输出频率

f
      (KHz)
Vin=12V
ON/OFF=5V
Vbrit=0V
RL=100kΩ
00C
48
---
---
---
260C
50
---
---
---
500C
52
---
---
---
8m
 




      





 
 


  
   

   

   
12. PWB Layout
    Diagram   / 线路板印制图
TOPPVIEW /顶层
 




        





 
 


  
   

   

   
 
13. Safety Parts List / 安规元件清单
No.
序号
Description
描述
Manufacturer
制造商
File No.
证书编号
1
PCB/印制线路板
KE XIAN  PCB
E222151
WEI DE XIN
E304272
2
Transformer/变压器
SANQIANG
  
2.1 Bobbin/骨架
Sumitomo Chemical
E54705
2.2 Copper Wire/漆包线
TAI-I COPPER
E85640
2.3 Copper Wire/漆包线
Dongguan Dongwei
E222363
2.4 Insulating tape/绝缘胶带
YAHUA
E165111

2.5 Insulating
      Varnish/绝缘漆
HANG CHEUNG
E200154
3
Connecter/插座
LAND WIN
E159426
FULL CON
E204211
EVER CONN
E115256
4
Fuse/保险丝
Little
E10480
AEM
E232989
 
14. Abnormal Operating Testing / 非正常工作测试

Damage to the inverter must not occur such as
    fire, high temperature, breakdown, and molten metal etc, in equipment. 非正常工作条件下，不可出现起火、高温、击穿、出现熔出金属等现象。
 







 
 
 
 



 



  





 
 


  
   

   

   
15. Notice / 注意事项

A. Do not attach a conducting tape to lamp connecting wire, if the lamp
    wire attach to conductive tape, TFT-LCD module have a low luminance and the
    inverter has abnormal action because leakage current occurs between lamp
    wire and conducting tape. If the display arrangement is less friendly such
    as the asymmetrical wiring forces unequal losses and the lamps receive
    imbalanced current. Even with identical lamps, illumination may not be
    balance.

请勿试图在灯管的连接线上连接导线等物品，这样可能会造成灯管的电流不平衡，TFT-LCD模组的亮度会变暗，对相同的灯管，亮度也会产生不平衡现象。本产品也可能由于灯管的连接线上连接了类似导线等物品产生漏电流，而造成其它非正常动作。

B. For
    Safety Issue, please keep 4.0mm at least from the metal parts of the system
    to the inverter. or put a suitableinsulator
    between the inverter and the metal parts to avoid the situation of breakdown or arcingetc.

基于安全问题,请在组装本产品时,确保本产品和整机中的金属材料间保持至少4mm以上的距离, 或者使用足够绝缘等级的绝缘材料进行隔离, 避免高压放电而产生危险。

C. Don’t
    twist , deform , drop or knock the inverter during assembly.

请在组装本产品时,避免扭曲,弯折,大力碰撞及跌落产生损害。

D.
     Guarantee to offer ESD shield bag to
    protect the product from electrostatic or magnetic interference during
    delivery. Due to the
    inverter is usually designed without the enclosure. please
    take care about ESD at anytime .

在产品交付的整个过程中均保证采用ESD屏蔽袋包装处理,因为该产品无外壳保护, 请务必随时注意防静电措施。

E.     China Galaxy products are not intended
    for use in systems in which failures of product could result in personal
    injury.

请勿将本产品使用在非适用范围的产品上，以免造成意外伤害。
 
 
              
All mentioned trademarks are registered by SAQCN.
此份文件中所涉及到的商标属深圳市赛其创新科技有限公司注册商标。

  
 




联系方式

请登录查看